BUILDING MATERIAL

ATLAS ROOFING SHINGLES

Atlas Pinnacle PristineHigh Performance Architectural Laminate Shingles

Features & Benefits :

• Limited Lifetime Warranty on Shingles.
• 130 mph Wind Resistance Protection.
• 3M Scotchgard Protector.
• Algae Resistant.

Packaging :

1 bundle = 33 sqft.

THERMAL BOND V2200-High Performance Structural Glazing Open Cell Spacer Tape

Semi-Rigid Polyurethane Foam Substrate used as a Structural Glazing and Cladding Spacer System for In-Shop Fabrication.

Features & Benefits :

• An open cell structure allows air and moisture to reach the silicone, permitting optimum curing.
• Semi-rigid polyurethane foam substrate is chemically compatible with all silicones tested.*
• Low thermal conductivity foam substrate reduces heat transfer and inhibits condensation on windows, doors and metal systems.
• Excellent resistance to weather, fungi and oxidation.
• Superb spacer for two-sided field and four-sided shop structural silicone glazing systems.
• Speeds shop fabrication of unitized panels.
• Easy to handle.
• Suitable for die cutting.

ST 100-Structural Glazing Spacer Tape

ST100 Series Is Specially Designed To Provide The Following Features And Benefits :

• High-strength PVC foam spacer suitable for structural glazing application.
• Unique foam cell morphology allows air and moisture to reach the silicone for optimum curing of the silicone.
• Low thermal conductivity improves the performance of the wall Semi-rigid foam is compatible with structural silicone sealants.
• High tack acrylic adhesive with red filmic liner for easy release.
• Excellent resistance to temperature variations, chemicals, fungi and oxidation.
• Designed to give a specific gap thickness for structural silicone in structural glazing systems.

NORBOND HE-123

Saint-Gobain NORBOND™ HE 123 is a grey, double-sided of high initial tack, coated acrylic foam tape with outstanding viscoelastic and adhesion properties. It offers ideal bonding performance for many interior and exterior industrial applications. Formulated for durable, long-lasting adhesion, HE 123 exceeds industry standards for shear strength and bonding to high surface energy, even at elevates temperatures.

LE-A4 – Mechanical Anchor

Mechanical Anchor LE-A4 consists of threaded rod bolt ended with expansion cone, expansion sleeve, hexagonal nut and washer. It is made of A4 stainless steel. Fixing is executed by tightening the nut with adequate torque which causes sliding of expansion sleeve over the expansion cone and creates a permanent anchorage. The anchor is ideal for fixing in aggressive, urban and industrial environments, both indoor and outdoor: metal substructure of the facade, machines and equipment, montage of light and medium weight steel structures, handrails and storage racks. Recommended for substrates: cracked and non-cracked, reinforced and non-reinforced concrete of C20/25 ÷ C50/60 strength class.

Advantages :

• Fast and simple installation by driving the anchor and tightening.
• Ready to carry full capacity immediately.
• Supplied assembled with the nut and washer.
• Seismic surveys.
• Fire resistance R30 – R120.

LE-ZNA4 – Mechanical Anchor

Mechanical Anchor LE-ZNA4 consists of threaded rod bolt ended with expansion cone, expansion sleeve, hexagonal nut and washer. Threaded rod bolt, nut and washer are made of low carbon steel and covered with a layer of zinc, while the expansion sleeve is made of A4 stainless steel. Fixing is executed by tightening the nut with adequate torque which causes sliding of expansion sleeve over the expansion cone and creates a permanent anchorage. The anchor is ideal for fixing in non-aggressive environments and both indoor: metal substructure of the facade, machines and equipment, montage of light and medium weight steel structures, handrails and storage racks. Recommended for substrates: ∙ cracked and non-cracked, reinforced and non-reinforced concrete of C20/25 ÷ C50/60 strength class.

Advantages :

• Fast and simple installation by driving the anchor and tightening.
• Ready to carry full capacity immediately.
• Supplied assembled with the nut and washer.
• Seismic surveys.
• Fire resistance R30 – R120.

LE- ZN – Mechanical Anchor

Mechanical Anchor LE-ZN consists of threaded rod bolt ended with expansion cone, expansion sleeve, hexagonal nut and washer. It is made of low carbon steel. Corrosion protection is ensured by galvanized zinc coating. Fixing is executed by tightening the nut with adequate torque which causes sliding of expansion sleeve over the expansion cone and creates a permanent anchorage. The anchor is ideal for fixing in indoor: machines and equipment, montage of light and medium weight steel structures, handrails and storage racks. Recommended for substrates: non-cracked, reinforced and non-reinforced concrete of C20/25 ÷ C50/60 strength class.

Advantages :

• Fast and simple installation by driving the anchor and tightening.
• Ready to carry full capacity immediately.
• Supplied assembled with the nut and washer.
• Fire resistance R30 – R120.

LE-DA4 – Mechanical Anchor

Mechanical Anchor LE-DA4 consists of threaded rod bolt ended with expansion cone, expansion sleeve, hexagonal nut and washer. Threaded rod bolt, nut and washer are made of low carbon steel and covered with SQ Ceramic coating, while the expansion sleeve is made of A4 stainless steel. Fixing is executed by tightening the nut with adequate torque which causes sliding of expansion sleeve over the expansion cone and creates a permanent anchorage. The anchor is ideal for fixing in urban and industrial environments, both indoor and outdoor: metal substructure of the facade, machines and equipment, montage of light and medium weight steel structures, handrails and storage racks. Recommended for substrates: cracked and non-cracked, reinforced and non-reinforced concrete of C20/25 ÷ C50/60 strength class.

Advantages :

• Fast and simple installation by driving the anchor and tightening.
• Ready to carry full capacity immediately.
• Supplied assembled with the nut and washer.
• Seismic surveys.
• Fire resistance R30 – R120.

Hybrid Injection Anchor – WCF-XS

Hybrid two-component injection anchor without styrene. Dedicated for reliable and durable connections. Anchor used for setting of threaded rods and rebars into concrete substrates. It has a seismic certificate for the C1/C2 category (for threaded rods).

Substrate Material :

• Non-cracked and cracked concrete, reinforced and non-reinforced (option 1) C20/25 through C50/60.
• Non-cracked concrete, reinforced and non-reinforced (option 7) C20/25 through C50/60.
• Rebars – post installed reinforcement connection.

Methacrylate Injection Anchor – WCF-EASF

Methacrylic two-component (1:10) injection anchor without styrene. Dedicated for reliable and durable connections. Anchor used for setting of rebars into concrete substrates and installation of threaded rods into concrete substrates and into masonry elements and hollow bricks with nylon mesh sleeves TSN or metal mesh sleeve TSM.

Substrate Material :

• Non-cracked and cracked concrete, reinforced and non-reinforced (option 1) C20/25 through C50/60.
• Non-cracked concrete, reinforced and non-reinforced (option 7) C20/25 through C50/60.
• Rebars – post installed reinforcement connection.
• Full brick, slotted brick, ceramic block.

Epoxide Injection Anchor – WCF-E3

Epoxide, dual components injection anchor 1:3 without styrene. For professional use in most reliable, durable connections. Anchor used for setting of threaded rods and rebars into concrete substrates.

Substrate Material :

• Non-cracked and cracked concrete (option 1) C20/25 through C50/60.
• Reinforced and non-reinforced concrete.
• Dry and wet concrete and flooded holes (Cat 2).
• Rebars – post installed reinforcement connection.
• Non-cracked concrete (option 7) C12/15 through C50/60.
• Reinforced and non-reinforced concrete.
• Dry and wet concrete.

WSPCV Self Drilling Screws

Screws WSPCV/WSPCV for fixing PVC window profiles to steel reinforcement elements up to 1 mm thick. They are made of carbon steel with zinc plating ≥ 8 μm thick. Zinc plating ensures high corrosion protection which is not subject to damage when in use. Screws have countersunk head with PH drive which ensures flush fitting of the screw in the installed member and special thread and sharp self-drilling point which ensures easier and faster screw installation in steel. Screws WSPCV-R have special ribs under the head which prevent their turning when in use. Screws require no pre-drilling in PVC profiles and steel reinforcement.

Advantages :

• High corrosion protection – zinc plating ≥ 8 μm thick.
• PH drive with marking – exact size and good workmanship make it ideal for use with automatic screw driving units.
• Countersunk head – ensures flush fitting of the screw in the installed member.
• Special ribs (WSPCV) – prevent screw turning when in use.
• Correct thread pitch – correct fixing of PVC to steel members.
• Sharp self-drilling point – ensures easier installation in steel.

WPCV-Self Tapping Screws

Screws WPCV-R/WPCV for fixing steel fittings to PVC profiles. They are made of zinc plated carbon steel. Zinc plating ensures high corrosion protection which is not subject to damage when in use. Screws have countersunk head with PH drive which ensures flush fitting of the screw in the installed member and special thread and sharp point which makes installation significantly faster and easier. Screws WPCV-R have special ribs under the head which prevent their turning when in use. Screws require no pre-drilling in PVC profiles.

Advantages :

• High corrosion protection – zinc plating.
• PH drive with marking – exact size and good workmanship make it ideal for use with automatic screw driving units.
• Countersunk head – ensures flush fitting of the screw in the installed member.
• Special ribs (WPCV-R) – prevent screw turning when in use.
• Correct thread pitch – ensures correct installation in PVC window frames.
• Sharp point – ensures easier and faster screw installation in place.

SMN – Hammer Drive Plug

Hammer drive plug SMN comprises a polyamide sleeve and a countersunk head screw made of electroplated coatings or non-electrolytically applied zinc flake coatings steel. It is designed for fixing of wood and wood-based members. Increased head diameter ensures much better holding power of the elements being installed, and countersunk section provides reliable installation and eliminates damage to the screw when driving.

Types Of Substrates On Which Hammer Drive Plug SM/SMN Can Be Installed :

• Normal concrete (use category A).
• Solid masonry (use category B).
• Hollow or perforated masonry (use category C).
• Lightweight aggregate concrete (use category D).
• Autoclaved aerated concrete (use category E).

KPS-KPR Fast Nylon Frame Fasteners

Sleeves of frame plugs are made of polyamide with a specially shaped steel screw type K (hex head) or S (countersunk head) for fixing of members on all substrate types. Screws are made of electroplated coatings or non-electrolytically applied zinc flake coatings hardened steel or stainless steel A4. Frame plugs are characterized by very high resistance and problem-free installation in various materials. Plugs with hex head (K) are used for fixing of metal members, and plugs with countersunk head (S) for fixing of wood members. The sleeve is pre-assembled with the screw.

Substrates On Which Frame Plug KPR-FAST 10 K/KPS-FAST 10 S Can Be Installed According To ETAG 020 :

• Category A – concrete.
• Category B – solid clay brick and sand-lime brick.
• Category C – hollow clay and sand-lime brick, porous block.
• Category D – lightweight concrete blocks, autoclaved aerated concrete.

SFX – Universal Plug Plastic Sleeve

Universal plug plastic sleeve SFX is made of polyamide. It is used for fixing of members on most of building substrates. The sleeve has ribs and stabilizing fins which prevent rotation of sleeve during installation and provide initial fixation in the substrate. Unique shape of the sleeve allows for installation in both solid materials (by expansion of the sleeve) and materials with voids (by shape fixation – “knot” formation).

Types Of Substrates On Which Plastic Sleeve SFX Can Be Installed :

• Concrete.
• Solid clay brick and sand-lime brick.
• Hollow clay brick and sand-lime brick.
• Autoclaved aerated concrete.
• Cement board.
• Plasterboard.

GE-Momentive Silicone

• GE 2000 (General Purpose Silicone Sealant) Packing – 260ml Cartage.
• WINSIL 20 (Multi-Purpose Silicone Sealant) Packing – 280ml Cartage.
• SILGLAZE WS (Weather Silicone Sealant) Packing – 300ml Cartage.
• AP 3600 (Weather Silicone Sealant) Packing – 500ml Foil.
• SCS 9000 SILPRUF NB (Weather Silicone Sealant) Packing – 600ml Foil.
• SSG 4000 (Structure Glazing Silicone Sealant) Packing – 600ml Foil.
• SSG 4400 (A+B) (2 Part Structure Glazing Kit) Packing – A part (265.3kg) ,B part (19.2kg).
• IGS 3723 (A+B) (2 Part Insulating Glass Kit) Packing – A part (265.3kg) , B part (19.2kg).

Bostik Seal ‘N’ Flex®

Description :

Bostik Seal ‘N’ Flex® 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough & flexible seal capable of cyclic expansion & compression movement of 100% (±50%) of the original installed joint width.

Features & Benefits :

• Low modulus.
• ± 50% joint movement.
• Excellent durability.
• One component.
• No mixing required.
• Acoustic rated.
• Non staining.
• Paintable.
• Available in 12 popular colors.
• Made in Australia.

Packaging :

300ml Cartridge, 600ml sausage.

Fill-A-Gap

Description :

Bostik Fill-A-Gap is a one-part water based, paintable acrylic gap filler. It is a general purpose, gun able one-part water based, acrylic gap filler. This easy to use, economical sealant provides excellent adhesion for gaps in low movement joints.

Features & Benefits :

• Excellent sealing and adhesion properties.
• Skins within 15 minutes.
• After 2 hours can be over – painted with acrylic paint.
• Once fully cured (2-3 days) oil based paint can be used.
• Interior / Exterior use.
• High bond strength.
• Once cured, excellent water resistance.

Packaging :

400 gm catridge, 1, 5 & 10 kg Containers

Moisture Seal

Description :

Moisture Seal is a two component, high performance, waterbased epoxy waterproof vapour barrier membrane to prevent water seepage and permeation from floors, walls, water tanks, reservoirs and water retaining structures.

Features & Benefits :

• Environment friendly.
• Easy clean-up using water.
• Cured membrane will withstand high levels of hydrostatic pressure upto 25 meter head of water or 250 Kpa.
• Can be applied to damp surfaces.
• Potable waterapproval.
• Can be safety applied to freshly laid hardened (green) concrete.
• Non-flammable.
• Negligible odour and toxicity.
• Has excellent adhesion to most substrate including brick, masonry, concrete, block concrete, compressed fibreboard, stone and timber.
• Convenient equal part mixture ratio (by volume).
• Tested to ASTM E 96 for water vapour transmission.

Packaging :

1, 8 kg. kit

Boscolastic

Description :

Boscolastic is a two component flexible acrylic polymer cementitious waterproofing coating that is mixed on site and resurfaced on concrete and other construction materials to  waterproof. Boscolastic has excellent weathering resistance and crack bridging property.

Features & Benefits :

• Flexible, elastic & can bridge cracks.
• Accommodates flexible movements in suspended structures.
• Can be tiled over successfully.
• Bonds well to sound substrates.
• Ability to withstand heavy topping without fracture.
• Applied on damp walls and floors.
• Can be painted over with elastic paints.
• Hard and abrasion resistant.

Packaging :

1.2, 6, 17.5 & 35 kg set.

Elastocoat

Bostik Elastocoat is a high performance Elastomeric acrylic based water proofing coating with anti-fungal & crack bridging ability. Recommended for protection of exterior cementitious surfaces.

Features & Benefits :

• Reliable crack bridging.
• Low water absorption.
• Alkali resistance.
• Low dirt pick up.
• Seamless membrane with good breathability.
• Long term exterior durability.
• UV Resistant.
• Water based & environment friendly.
• Can be tinted to desired shades.

Packaging :

5 & 20 Ltrs.

Super Fixall

Super FIxall is an exceptionally high strength, waterproof, cement based adhesive developed to bond all types of ceramic tiles. It is ideal for bonding monocottura and fully vitrified tiles, as well as natural stone, marble, granite and mosaic tiles onto brickwork, cement render and concrete walls and floors. Suitable for both internal and external applications.

Features & Benefits :

• High strength bond.
• Odourless.
• Water cleanable.
• Non-toxic.
• Easy to spread.
• Thick and thin bed applications.

Packaging :

20 & 30 kg.

Fixall

Fixall is a rigid set, high quality cement-based adhesive suitable for most types of vitrified, ceramic, wall and floor tiles including natural stones of regular size. Fixall is also suitable for renovation of interior floor and walls. When used with Bostik’s Hydroment it can fix heavier stones too.

Features & Benefits :

• High strength bond
• No odour
• Economical
• Water cleanable
• Non toxic
• Easy to spread
• Interior use for wall and floor
• Thick & thin bed application

Packaging :

20 & 30 kg.

Bostik N310-No More Nails Classic

Bostik N310 NO MORE NAILS CLASSIC is a versatile general purpose construction adhesive suitable for bonding a wide variety of building materials for internal and external applications.

Packaging :

275 ml Cartridge, 20 per box.

Boscocem 475 / SBR

Styrene Butadiene Based Mortar Modifying & Bonding Agent.

Features & Benefits :

• Good adhesion to concrete / masonry surfaces.
• Improving tensile and flexural properties of repair mortar.
• Reduces water penetration and shrinkage.
• Better abrasion and chemical resistance of cement screed.

Packaging :

200, 500 ml, 1, 5, 10, 20, 50, 100 & 200 Litres.

Anchor Grout

Anchor Grout is polyester resin based grout material suitably blended with a hardening compound and fillers & supplied as a pre measured, two part, resin grout. After hardening, the grout has high mechanical properties. Anchor Grout is used where the difference between the hole diameter and bar diameter is ≤ 25mm.

Features & Benefits :

• Rapid strength gain.
• Vibration resistant.
• Corrosion resistant.
• Non expansive.
• Can be placed under water.

Packaging :

1 Kg.